Tork Craft 10″ 250mm Polishing Bonnet Wool

Features:
– Tie on polishing wool buff
– Diameter: 250mm Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with laces. Make sure the Diameter of the polishing buff is the same as the backing pad’s Diameter. It is necessary to polish a vehicle body panel when:
– The panel has been newly painted with ...a clear-coat.
– Shallow scratch marks need to be removed.
– The panel has suffered from oxidation.
– Swirl marks and hologram defects need to be removed. Tip:
The buff is washable after use if the polishing compound is soluble. Tie on polishing wool buff range:
Order No.
Diameter
Use Backing Pad MM4
100mm MM5
125mm TCBP125C /
PG338 MM6
150mm TCBP150C
MM7
180mm PG33805
MM7-2
180mm PG33805
MM8
200mm MM9
230mm MM9-2
230mm MM10
250mm Recommended polishing compounds to use
Liquid Shine & trade:
– High cut – Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces. Liquid Shine & trade:
– Fine cut – similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks. Liquid Shine & trade:
– Zero swirl – Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step What’s in the box
1x 10″ 250mm Polishing Bonnet Wool