5′ 125mm polishing bonnet wool

Diameter: Ø125mm
Use backing pad:

TCBP125C /

PG338

 Application:

The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
the same as the backing pad’s diameter.

It is necessary to polish a vehicle body panel when:

• The panel has been newly painted with a clear-coat.
• Shallow scratch marks need to be removed.
• The panel has suffered from oxidation.
• Swirl marks and hologram defects need to be removed.

TIP:
The buff is washable after use if the polishing compound is soluble.

Tie on polishing wool buff range:

Recommended polishing compounds to use:

• 
  Liquid Shine™
  High cut – Features a silicone, wax and filler free polishing
  compound to give a high gloss finish on fresh or cured paint. It is capable
  of removing P1500 grit sanding marks. It can be used on automotive paints,
  marine gel-coats and on composite surfaces.
• 
  Liquid Shine™
  Fine cut – similar to the High cut polishing compound, but it
  is designed for use on a ceramic and scratch resistant clear-coat. It is
  capable of removing P2000 scratch marks.
• 
  Liquid Shine™
  Zero swirl – Very low abrasive for the final step of polishing.
  Removes holograms and swirl marks. Use a soft compounding sponge as a final
  step