Tork Craft 9″ 230mm Polishing Bonnet Wool

Features:
– Tie on polishing wool buff
– Diameter: 230mm

Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with laces. Make sure the Diameter of the polishing buff is the same as the backing pad’s Diameter.

It is necessary to polish a vehicle body panel when:
– The panel has been newly painted with a clear-coat
– Shallow scratch marks need to be removed
– The panel has suffered from oxidation
– Swirl marks and hologram defects need to be removed

Tip:
The buff is washable after use if the polishing compound is soluble.

Tie on polishing wool buff range:
Order No.
Diameter
Use Backing Pad

MM4
100mm

MM5
125mm

TCBP125C /

PG338

MM6
150mm

TCBP150C

MM7
180mm

PG33805

MM7-2
180mm

PG33805

MM8
200mm

MM9
230mm

MM9-2
230mm

MM10
250mm

Recommended polishing compounds to use
Liquid Shine & Trade:
– High cut – Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.

Liquid Shine & Trade:
– Fine cut – similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.

Liquid Shine & Trade:
– Zero swirl – Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step

What’s in the box
1x 9″ 230mm Polishing Bonnet Wool